Manually Inputting Frequency and Symbol Rate in an XDS Receiver

If your receiver has lost our signal perform the following steps:

1.      Press “Set” until you see “status”
2.      Right arrow to Setup, Press “set”
3.      Right arrow until you see “Tuner”, Press “Set”
4.      The cursor will be blinking over the numbers.  Press the up/down and right/left buttons to scroll to the correct number to create the frequency 01040000 kHz. Press "Set" when complete.
5.      When done press the up button until you see “Tuner” again, Press “Set”
6.      Press the right arrow until you see “Symbol Rate”. Press “Set”
7.      The cursor will be blinking over the numbers.  Press the up/down and right/left buttons to scroll to the correct number to create the Symbol Rate 07136000 sp. Press "Set" when complete.
 
At that point the receiver should lock in on the new carrier.

It may be necessary to reboot the receiver:

1.      Press “Set” until you see “status”
2.      Right arrow to Setup, Press “set”
3.      Right arrow until you see "Reboot". Press "Set"
4.      Press the "1" button under the word "yes"

If you have any issues contact us at (888)407-4376 option 2 during normal busines hours or contact Premiere Network Operations at (818)461-5409 or (818)377-5309.

If you have any questions please contact us at help@fnnonline.net.